A Fernbrook company - serving Mesquite, NV

Amarr Cable & Drum Replacement in Mesquite, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Amarr Cable & Drum Replacement: The Mesquite Owner’s Guide

We replace Amarr-compatible cables and drums in Mesquite, and most jobs land between $130 and $250 per cable-and-drum side, installed. Cable failures are one of the repairs we can often handle the same day you call, because lifting cables and drums are common parts rather than special-order items. Owners usually find out something is wrong when the door starts hanging crooked, a cable goes slack and tangled on one side, or there’s a sharp pop from the track area and the door won’t lift level anymore. By the time a drum has chewed through its cable, the door is usually straining the opener as well.

Call (888) 255-7680

Key Takeaways

  • Most Amarr cable and drum replacements run $130 – $250 installed per side.
  • Cables and drums are the parts that keep a door level; when one goes, the other side is working harder.
  • High-tension cables under load can injure seriously. We recommend a trained technician for the swap and say so plainly below.
  • You get a written price before any work starts, and the 365-Day Done Right Promise backs the installation.

Which Amarr Models This Applies To

Cable and drum replacement is common across Amarr’s residential lines: the Stratford and Heritage steel models, the Classica collection, the Olympus and Olympus XL, and the Carriage House and Hillcrest lines. All of them use a torsion system with cable drums at each end of the shaft, so the mechanical idea is the same. The specific drum depends on the door’s height, weight and panel count – a single-car door and a double-car door take different drums and different cable lengths.

Your model is on a label inside the door, usually on the top panel or the end stile. Knowing the model and measuring the door width and height is enough to match the part. The point where DIY goes wrong here is trying to convert a drum spec loosely. An Amarr drum and cable set is matched to that door’s intended lift; using a generic drum on a heavier Amarr door is asking for a short service life and uneven wear.

Fernbrook Garage Door Repair Mesquite is an independent service provider, not affiliated with Amarr. We install Amarr-compatible parts and can also source OEM items where the model calls for it. On OEM versus a quality aftermarket equivalent, the decision usually comes down to the model and the budget: OEM is the safe match for a door still in its original spec, while a quality aftermarket set is a fair option when the door’s been in service long enough that any properly rated drum is a good fit.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Signs Your Amarr Cable & Drum Replacement Is Failing

  • Door hangs or lifts crooked on one side. A cable that has slipped its drum will pull one side down unevenly, and you’ll see the gap under the door change across its width.
  • A cable is slack, frayed or tangled. Cables under load don’t fray gently – a worn cable fails without warning, often near the drum where it coils tightest.
  • Loud pop or bang near the track. That’s often a drum letting go or a cable jumping off. Stop using the door and treat it as a repair call.
  • Door won’t open past a point or is stiff. A seized drum or a cable that’s no longer spooling cleanly creates tension the opener can’t overcome.
  • Hunting, noise or grinding at the end of travel. A snagged cable or worn drum can make the door hunt for the limit, so the opener keeps working harder than it should.

Replacement Cost & What’s Included

Cable repair in Mesquite runs $130 – $250 per side for the cable and drum, and a full two-cable replacement with drums installed is typically toward the top of that range. If the torsion spring has also been damaged, spring repair runs $180 – $340 separately. General garage door repair jobs usually land between $150 and $600 depending on how many parts fail together.

What drives the range: door size, whether one or both sides are being replaced, and whether the call includes a tune, roller check or spring inspection. You’ll get a written price before any work starts, with the parts and labor broken out so you can see what each piece costs. The change in your home isn’t an invoice – if something doesn’t match what was quoted, the 365-Day Done Right Promise means we make it right, no negotiation needed.

What’s included on every visit

Our technicians are background-checked and uniformed, and they follow the Cedarwell Care Promise: shoe covers and drop cloths inside the home, quiet tools when the family’s asleep, ask before moving anything, and a photo of the clean-up before they leave. Pet-safe lubrication where there’s a choice. Fernbrook Garage Door Repair Mesquite handles Amarr, along with LiftMaster, Chamberlain, Genie, Clopay, Wayne Dalton, Craftsman and Raynor equipment, so we’re not guessing at parts fit.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check that the door is level, look for a visibly frayed cable, and confirm the model on the door’s label. That’s useful information to have ready before you call. What we don’t recommend is replacing the cables or drums yourself. They’re held under tension and are genuinely dangerous to work on without the right training and tools – a slipping drum under load can injure badly. So the honest answer is: check and call. Leave the swap to a trained technician.

Technicians on our team have up to 24 years of experience with this kind of work. A live person answers the phone around the clock, and cable and drum calls are usually the kind of repair we can get to the same day. Call (888) 255-7680.

FAQs

How long do Amarr cables and drums last?
Most cables and drums last somewhere between 8 and 15 years in a dry climate, and Mesquite’s low humidity is a friend to cables – it’s wear and cycle count that usually drives the replacement, not rust. Springs typically go first; when the spring is replaced, the drum and cable carrying that side get inspected too.

Can a failing Amarr cable or drum be repaired instead of replaced?
Sometimes, but the answer isn’t always one or the other. A drum that’s seized can be cleaned and re-adjusted; a cable that’s frayed, kinked or jumped a drum before the drum is damaged can be replaced on its own. Once a drum has worn a groove through the cable, though, the drum needs to go. We’ll tell you which one applies after we’ve looked.

How long does a cable and drum swap take?
Most jobs run about one to two hours for a single side, and a full two-cable and drum replacement usually fits in a half day. If the door’s tensioning has to be reset carefully on both sides, allow a little extra time. We’ll give you the schedule when you call.

How do you source the right Amarr part?
We match the door’s model, width, height and weight to a drum-and-cable spec that fits that door, not a universal one. If the model calls for OEM, we order it; otherwise a properly rated quality aftermarket set works well. Either way, the quote states which part we’re installing before work starts.

Contact Fernbrook Garage Door Repair Mesquite

If your Amarr door is hanging crooked or you’ve got a cable that’s gone slack, call us for a free estimate and we’ll get the right part for your door. Our technicians are trained on Amarr and the other major brands, and we back every job with the 365-Day Done Right Promise and the Cedarwell Care Promise. Call (888) 255-7680 to schedule – a live person answers, and you’ll have a written price before any work begins.

Written by the team at Fernbrook Garage Door Repair Mesquite, serving Mesquite and nearby areas.

Need Garage Door help nationwide? Licensed & insured · within the hour response · free estimates
Call (888) 255-7680
Local Service Coverage

Request a Free Estimate in Mesquite

Tell us what you need - Fernbrook Garage Door Repair Mesquite responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch