Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateClopay Torsion Spring Replacement: The Mesquite Owner’s Guide
We replace Clopay-compatible torsion springs on Mesquite garage doors, and a typical installed replacement runs $180 – $340 depending on door weight, spring size and whether we’re replacing one spring or the pair. If you call before the day gets away from you, spring work is usually something we can fit in the same day. Most Mesquite owners don’t discover the spring failed until the door stops lifting, lifts a few inches and stalls, or they hear a loud bang from the garage and find the door heavy and stuck. Because our technicians are trained on Clopay among eight major brands, we match the spring to your door’s actual weight and track radius rather than guessing at the label.
Key Takeaways
- Installed Clopay torsion spring replacement in Mesquite typically costs $180 – $340.
- Springs fail from metal fatigue, and Mesquite’s dry heat and big summer temperature swings wear them faster than a coastal climate would.
- This is not a safe DIY part. The spring is under high tension even when the door looks “down.”
- You get a written price before any work starts, every visit, plus a 365-Day Done Right Promise.
Which Clopay Models This Applies To
Torsion springs show up on Clopay’s heavier residential lines – the steel raised-panel and carriage-house models, most insulated doors, and any door wide enough that extension springs would sag. If you’re not sure which Clopay series you own, the model and serial labels are usually on a sticker on the inside of the door’s top panel or on the end stile. That label tells us the door’s weight class and the door style, and it’s the fastest path to the right spring.
Here’s the compatibility gotcha most people miss: a Clopay torsion spring is matched to wire gauge, inside diameter, and length, and the two springs on a two-spring door are almost always a matched pair sized for that door’s weight. Swap in a spring from a different-weight door and the door either won’t balance or puts extra load on the opener and cables. On the OEM-versus-aftermarket question, a reputable aftermarket spring in the correct gauge and cycle rating performs well; what matters is the size match, not the box it came in. We measure your existing spring and the door, then quote the correct replacement. We don’t stock parts and we don’t carry springs on a truck – the right spring gets sourced to your door’s spec.
Worth saying plainly: Fernbrook Garage Door Repair Mesquite is an independent service provider and isn’t affiliated with Clopay. We’re just trained on the brand, the same way we’re trained on LiftMaster, Chamberlain and Genie.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Clopay Torsion Spring Replacement Is Failing
Springs rarely fail quietly. Here’s what Mesquite owners typically notice, and what’s actually happening:
- The door feels impossibly heavy when you lift it by hand. The torsion spring does the lifting work; when it loses tension or breaks, you’re suddenly feeling the full door weight. A balanced door should lift with one hand.
- A bang from the garage, then the door won’t open. That’s the sound of a spring letting go. The door may lift a foot and stall, or the opener may strain and trip. Stop using the door at this point.
- A visible gap in the coil. A broken torsion spring shows a clear separation in the coil above the door. On a closed door you may spot it by eye; a trained technician confirms it during a service visit.
- The door lifts crooked or the cables go slack. A weakening spring throws the door out of balance, and the wound cable can slip. This one is worth treating as an immediate call, because a slack cable is a safety issue on its own.
- The opener runs but the door barely moves. People often blame the opener. More often the spring has weakened and the opener is fighting a door it was never meant to lift alone. We check the spring before we touch the opener.
Mesquite’s dry desert air and the swing between cool nights and hot afternoons work the metal harder than many owners expect. That’s a real lifespan factor here, not a sales line.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
With us, the price you hear before work starts is the price on the invoice. Here’s what Clopay torsion spring replacement in Mesquite generally runs:
| Job | Typical Installed Range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair replacement (two-spring doors) | At the upper end of the $180 – $340 range |
| Cable repair, if a cable was damaged when the spring failed | $130 – $250 |
| Opener repair, if the opener was strained | $120 – $320 |
What moves the number: door weight, one spring versus a matched pair, the spring specs your door needs, and whether a cable or the opener took damage when the spring let go. The written price is delivered before any work begins – every visit, no exceptions – so there’s no invoice bigger than the quote. The work is backed by our 365-Day Done Right Promise; if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: look for a visible gap in the coil, test whether the door lifts easily by hand (with the door closed and the opener disengaged), watch for crooked lifting, and read the model label inside the door. If something looks off, stop there. A torsion spring holds dangerous stored energy even when the door is down, and this is one of the parts where a wrong move can cause serious injury – a trained professional should do the swap. You shouldn’t be winding, cutting or adjusting that spring yourself, and we won’t talk you into it.
What you can count on when we come out: shoe covers on hardwood, drop cloths on tile, quiet tools if a nap is happening, pet-safe products where there’s a choice, and a photo of the clean-up before we leave. A live person answers when you call, 24/7 – no voicemail tree. Call (888) 255-7680 and we’ll get you a written price.
FAQs
A typical residential torsion spring is rated for a set number of cycles (one open-and-close is a cycle), and how long that lasts depends heavily on how often the door runs. In Mesquite, the dry heat and daily temperature swings speed up metal fatigue compared with milder climates, so a door used several times a day will wear its spring sooner. We check the spring’s condition during any service visit and tell you what we see rather than guessing at a date.
No. A broken or significantly weakened torsion spring can’t be repaired – it’s replaced, sized to your door’s weight and specs. If only one spring on a matched pair has failed, we look at both, because replacing the pair together usually makes more sense than a second failure a few months later. We’ll explain the options and the written price before anything starts.
A torsion spring replacement is usually a same-visit job, and with a matching spring on hand it’s typically done within a couple of hours depending on the door. If we need to source a specific size, we’ll tell you the timeline up front. Either way, you’ll have the written price before work begins.
We measure your existing spring and confirm the door’s weight and model from the label, then source a replacement in the correct wire gauge, inside diameter and length. We work with quality aftermarket equivalents as well as OEM-pattern parts, because the size match is what keeps the door balanced. We don’t stock parts and we don’t carry springs on a truck, so the right part is ordered to your door – not pulled off a shelf as a best guess.
Written by the team at Fernbrook Garage Door Repair Mesquite, serving Mesquite and nearby areas.
Ready to get your Clopay door balanced and quiet again? Call (888) 255-7680 for a free estimate – a live person answers, and you’ll have a written price before any work starts.